Multi-Colour Clicker Pen: Switching Colours and Refill Care

By One Dollar Only | Published: 2026-11-03

Category: Consigli e cura

Learn how to switch colours smoothly on a multi-colour clicker pen and keep the refills writing longer. Simple steps for school pen maintenance and unicorn pens for kids.

Quick answer

To use a multi-colour clicker pen, press one colour tab at a time until it clicks and locks, then press a different tab to switch. For refills, twist or pull the pen apart at the middle joint, replace the empty refill with a matching ballpoint refill, and reassemble.

Why clicker pens jam and how to prevent it

Multi-colour clicker pens jam when two colour tabs are pressed at once or when the pen is clicked too fast. The internal cam mechanism needs one tab to fully retract before another can extend. Teach kids to press slowly and listen for the click. Also avoid clicking the pen repeatedly as a fidget toy, as this wears down the spring and cam faster.

When to replace a refill instead of the whole pen

Replace a refill when the ink runs dry, skips, or becomes faint. If the pen body is cracked or the clicker no longer locks, replacing the whole pen is usually simpler. For the Unicorn Design Multi-Colour Clicker Pen, check that replacement refills match the original length and diameter; the catalog does not specify refill size, so measure the old refill before buying.

Step-by-step: switching colours and refilling

Press one colour tab at a time: Hold the pen upright and press a single colour tab until you hear or feel a click. The chosen colour will lock into writing position. Common mistake: pressing two tabs at once jams the mechanism. If this happens, press the stuck tab down firmly to reset.
Switch colours by pressing a different tab: To change colour, press another tab. The first colour retracts automatically as the new one extends. Checkpoint: if the new colour does not lock, the previous tab may not be fully retracted. Press it again gently.
Open the pen for refilling: Twist the pen apart at the middle joint (or pull firmly if it is a snap-fit). Keep the parts together to avoid losing the spring. Common mistake: forcing the pen apart can crack the plastic. If it resists, check for a small screw or clip that needs releasing.
Remove the empty refill and insert a new one: Slide out the empty refill and replace it with a matching ballpoint refill of the same length and diameter. Push it in until it sits flush. Checkpoint: test the clicker before closing the pen. The new refill should extend and retract smoothly.
Reassemble and test all colours: Twist or snap the pen back together. Click each colour in turn to confirm they all work and retract fully. If one colour sticks, reopen the pen and check that its refill is seated straight.
Store and care for the pen daily: Retract all refills before storing to prevent ink stains. Keep the pen away from heat and avoid dropping it on hard surfaces. For school pen maintenance, wipe the barrel with a dry cloth and avoid using harsh cleaners that can damage the plastic.

Product facts

Unicorn Design Multi-Colour Clicker Pen: Multi-colour design with a clicker mechanism and unicorn motif. The clicker lets kids switch colours quickly, and the playful design encourages them to use and care for the pen.
Unicorn Design Multi-Colour Clicker Pen